AQ Series
The AQ series is the best solution for those sound reinforcement applications requiring a multichannel amplifier with a mid output power density and a ver y good sounding characteristic but on an affordable budget. Implementing Power Factor Correction (PFC) technology along with Universal Mains Regulated SMPS power supply and Class D power modules, the AQ series combines in the same amplifier all the functional requirements for most sound reinforcement applications.
Features
- Class D power modules.
- Universal mains Regulated SMPS.
- XLR signal input and link connectors.
- SpeakON NL4 and binding-post output connectors.
- Input sensitivity selector (0.775V / 1V / 32dB).
- Routing mode selector (stereo / bridge / parallel).
- Channel independent protection and clip warning indicators on the front panel.
- Channel independent power and -5dB/-10dB/-20dB/ signal presence indicators on the front panel.
- Low unit weight.
Specifications
| Model | AQ500 | AQ800 | AQ1000 | AQ1300 |
| Output power | (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%) | |||
| 8Ω stereo | 500Wx4** | 870Wx4** | 1000Wx4* | 1300Wx4* |
| 4Ω stereo | 920Wx4** | 1500Wx4** | 1500Wx4* | 2000Wx4* |
| 2Ω stereo | 920Wx4** | 1500Wx4** | 1500Wx4* | 2000Wx4* |
| 8Ω bridge | 1500Wx2** | 2800Wx2** | 3000Wx2* | 3700Wx2* |
| 4Ω bridge | 1900Wx2** | 2800Wx2** | 3000Wx2* | 3700Wx2* |
| Other specification | ||||
| Frequency response | 20Hz-20kHz(+0/-1.2dB) | 20Hz-20kHz(+0/-1dB) | ||
| THD+N | ≤0.2% | ≤0.2% | ≤0.1% | ≤0.1% |
| S/N rate | ≥ 100dB | ≥ 98dB | ≥ 98dB | ≥ 98dB |
| Input sensitivity | 0.775/1.0V/32dB | |||
| Input impedance(bal/unbal) | 20kΩ/10kΩ | |||
| Voltage gain (8 ohm） | 38.2dB | 40.3dB | 41.2dB | 42dB |
| Output circuitry | Class D | |||
| Dimension / Weight | ||||
| Product Dimension(mm) | 483x461x89 | 483x335x89 | ||
| Packaging Dimension(mm) | 595x565x170 | 565x485x170 | ||
| G.W. | 11kg | 12.5kg | 9.5kg | 9.7kg |
Remark：
1、*Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
2、**Power tested under the condition of 20ms burst, 1KHz sine wave and 1% THD.
3、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.